I’m encountering an issue with connecting to the target application on my TI C2000 F280039C. The error message is: “Could not connect to target application XCP ...

I hope this message finds you well. We are currently utilizing Texas Instruments' mmWave radar in various radar systems and are now focused on the development of an in-cabin radar system. To expedite ...

We are using DAC81416 Digital to analog IC in one of our designs. We are not able to locate the Linux device driver for DAC81416. Please can you help us with the right device driver or any reference.

Try to updated SBL at default location at 0x0 in OSPI flash. And, we have backup image at 0x40_0000 on OSPI as fall back SBL. If update at 0x0 is failed or not properly done. AM243x might have fall ...

// Configure to run EMIF1 on half Rate (EMIF1CLK = CPU1SYSCLK/2). SysCtl_setEMIF1ClockDivider(SYSCTL_EMIF1CLK_DIV_2); // Grab EMIF1 For CPU1. EMIF_selectMaster ...

Check the generated file test.json, the 0x34, 0x38, 0x3C are configured to select PDM1 PDM1 and echo as channel0, channel1 channel2 in the I2S/TDM commnuication. 6. Copy the test.bin to the kernel and ...

I'm trying to use ADC ADEVT1 Pin as GPIO is it possible ?. can i get example code how to toggle that pin. If you want to use GIO output then first you need to configure the pin direction as output ...

I am encountering MibSpi3 RxBuf value not consistent with the SPI log. My situation is: the SPI3 is shared between TI TPS65381A-Q1 (psu) and Microchip MCP3208 (adc), and we implemented semaphore for ...

I have a slave (MC33772B) with which I want to communicate via SPI. This expects a message of 40 bits, but unfortunately my board can only send 16 bits. Is it still possible to send 40 bits with the ...

We want to config the TPS25751 as power role host and data role device. Our board will have a USB receptacle. We want to detect the tablet attached status.

I need a clarification how to implement the DSSM factory reset over SWD interface. I am developing the programming solution for MSPM0Lx devices where the host(master ...

Hello, I have a question regarding my DSP28377D board. It has been running normally for some time, but occasionally (it has happened many times, with a probability of about 1%) the program fails to ...